Categories
CONTACT

Shandong Alles Energy Technology Co.,Ltd

MOB:+86 15966602397

TEL:+86 0531 55535866

ADD:Room 1-1-3002, Olympia Plaza West District, Intersection Of Phoenix Road And Long’ao North Road, High-Tech District, Shandong Province, China

EMAIL: info@sdalles.com

3 Axis CNC Machine Center

TV Alloy Vertical Machine Center

TV Alloy Vertical Machine Center
Steel Matters, CNC Machine Thinker
——Quality assurance + After-sales service...
Chat Now

Product Showing

image001.png 

Highspindle

image002.jpg

Control   System (optional)

image004.jpg

Chip removal system 

image006.jpg

Lubrication system

image008.jpg

Workpiece   show

image010.jpg

image014.jpg

image016.jpg

image012.jpg

ATC Center (optional)

image018.jpg

image020.jpg

image022.jpg

Rotary Table

image024.jpg

 (only for for reference )

Products Information

Vertical machining center is mainly used for machining parts such as plate, disk type, shell parts and mold with high accuracy, multi-process and complex shape. It can finish milling, drilling, expanding, reaming, boring, Tapping and two-dimensional three-dimensional surface, bevel precision machining, processing, programming, shorten the production cycle, so that users get good economic benefits.


The Structural Features of Machine Tool

1. Overall layout of machine tools

VMC650 vertical machining center using vertical frame layout, pillar fixed on the bed, headstock (Z), move up and down along the column slide along the longitudinal mobile bed (Y), table along the slide transverse direction (X) structure.

The bed body, worktable, slide, column, spindle box big adopt high strength cast iron materials, such as the big using three-dimensional computer aided optimization design software, stiffened plate layout is reasonable, has the perfect heat treatment process to eliminate residual stress, guarantee the machine has sufficient strength, high rigidity and stability.

2. System

The NC system standard is equipped with Siemens 828D control system and drive, complete function and simple operation; Standard rs-232 communication interface, USB port and related software, have DNC on-line processing function.

3. Drag system

X, Y, Z axis guide adopt Taiwan Hiwin silver 28 mm wide linear rolling guide, dynamic and static friction force is small, wear small high positioning accuracy, high sensitivity, high speed small vibration, long service life and interchangeable, servo drive performance, improve the accuracy and precision of machine tool stability.

X, Y, Z axis servo motor by flexible coupling with Taiwan high precision ball screw straight league of silver, the decrease of the intermediate links, to achieve zero clearance transmission, feeding flexible, accurate positioning and high driving accuracy.

The z-axis servo motor has the function of automatic holding brake. In the case of power failure, the motor shaft can be automatically held to hold the motor shaft, so that it can not rotate and play the role of safety protection.

4. Spindle groups

The spindle group adopts the 10000rpm high-speed spindle of Taiwan, with the highest setting speed of 8000rpm, with high precision and high rigidity. The oil cooler is configured to cool the spindle. NSK bearings bearing adopts special of P4 level, a complete set of spindle assembly under the condition of constant temperature, after the completion of all through the dynamic balancing correction and running-in test, improve the service life and reliability of a complete set of spindle.

The main shaft can realize stepless speed regulation within its speed range, and the main shaft adopts the motor internal encoder to control, which can realize the main shaft orientation and the rigidity tapping function.

5. ATC Center

Adopt Taiwan disc type 16 knife library, installed in the column profile, change the knife dish driven by roller CAM mechanism and positioning, spindle position after arrived in the knife, knife by the manipulator device (ATC) finish send knife, knife and still ATC as the roller gear CAM mechanism, after preloading with no noise, fast accurate tool change process.

6. Cutting Cooling System

Equipped with large flow cooling pump and large capacity water tank, fully guarantee circulating cooling, cooling pump power is 120W, 20L/min large flow cooling pump, fully providing cooling.

The main shaft box is equipped with a cooling nozzle, which can be both cold and cold.

Use clean air gun to clean machine tools.

7. Air-operated System

Air-operated triplets can filter the impurities and moisture in the gas source, preventing the unpure gas from damaging and corroding the machine parts. The solenoid valve control system is controlled by PLC program, so that the main shaft, main shaft, main shaft clamping, and main shaft air cooling can be completed quickly and accurately.

8. Machine Tool Protection

The machine adopts the safety standard, which can prevent the spray from splashing and safe operation and pleasant appearance. All the guide rails of the machine have a protective cover to prevent the cutting and cooling fluid from entering the inside of the machine, so as to protect the guide rail and ball screw from wear and corrosion.

9. Lubricating System

Guide/ ball screw pair adopts centralized automatic thin oil lubrication, each node is equipped with quantitative type oiler, timing quantitative filling to the lubrication parts, ensure the uniform sliding surface lubrication, effectively reduce the friction resistance, improve the motion precision, ensure the ball screw pair and the service life of guide rail.

10. Chip System

The iron cuttings produced during the process fall directly into the protection, and the internal bevel structure allows the scrap to slip smoothly into the chip slot and then be removed through the drawer.

11. Working conditions of machine tools

(1) Working power supply: three phase current 380V±10%  50HZ±1%

(2) operating temperature: 5℃-40℃

(3) The best environment temperature: 15℃-25℃

(4) relative humidity: 40-75%

(5) Air source pressure: 0.5-0.7Mpa


Main Technical Parameters of The Machine Tool

Main Technical Parameters

Item

Content

Unit

Specification

Worktable

Table area

mm

920×400

T-slot

mm

3-14-120

Max load

Kg

300

Stroke

Moving range     X/Y/Z

mm

650×400×500

Distance Spindle nose to worktable

mm

100-600

Feeding

Fast moving speed X/Y/Z

m/min

30/30/18m/min

Cutting feed speed X/Y/Z

mm/min

1-10000mm/min

Spindle

Spindle number

 

BT40

Rotation range

r/min

40-8000rpm

Spindle power

kw

Servo 7.5

Accuracy

Positioning accuracy

mm

±0.015

Re-positioning accuracy

mm

±0.0075

ATC Center

Tool magazine capacity

 

16

Max tool weight

kg

8kg

Max tool size

mm

φ120×200

Tool change time

"

1.8


Standard Configuration of Machine Tools

NO.

Name

Remark

1

System

Siemens    828D servo system

2

The main electric machine

Siemens    supporting 7.5/11KW servo motor

3

Feed electrical machine

Siemens    servo motor

4

Spindle

Taiwan 10000rpm high-speed high precision    spindle unit

5

Screw

Taiwan Hiwin    brand precision ball screw.

6

ATC Center

Taiwan disc type    knife bank, knife storage capacity 16

7

Machine    lighting work lights

13

Spindle:BT40 7/24

8

Spindle    cone cleaning air

14

Separate    handwheel

9

Chip    fluid system

15

Full    protection (excluding the top)

10

Plug-in    high-pressure clean air gun

16

Spindle    oil cooler

11

Foundation    horns and adjusting bolts

17

 

12

Stochastic technical    documentation

 

 


FAQ:

1. Machining Center Mechanical Parts Maintenance items:

(1) check the lubrication system, the state of the pressure gauge, clean the lubrication system filter, replace the lubricant, and clear the oil circuit.

(2) Check the air system, clean the air filter, and eliminate pressure gas leaks.

(3) check the fluid system, clean the filter, clean the fuel tank, replace or filter the oil. If possible, replace the seal.

(4) Tighten the transmission parts and replace the bad standard parts.

(5) grease lubrication parts, according to requirements, add grease

(6) clean, clean the transmission surface.

(7) Check the status of the tool magazine and robot, analyze the wear status of the robot, and propose replacement suggestions to the customer.

(8) Repair the damaged parts of the external components.

(9) check the state of the protective cover. Accurately feedback information to customers.

2. 3 axis cnc horizontal machining center has CE certification?

CE  ISO  SYSTEM   EPQ CF